DC++k
Moderator: Moderators
I still seem to have problems with the junkfile checker. example:
[12:09] <BSOD2600> User [ICP]OPS-PSV Junk files found - 282.30 GB was junk, Stated share = 160.20 GB, Real share = 19.05 GB.
I manually got the guys filelist and he had 7 20GB AVI files in ADLSearh = 141.15GB.
So there still is something funny with the math you're using...
[12:09] <BSOD2600> User [ICP]OPS-PSV Junk files found - 282.30 GB was junk, Stated share = 160.20 GB, Real share = 19.05 GB.
I manually got the guys filelist and he had 7 20GB AVI files in ADLSearh = 141.15GB.
So there still is something funny with the math you're using...
-
- Posts: 202
- Joined: 2003-01-06 06:22
- Location: Salford, England.
- Contact:
BSOD2600:
Hmm... strange.
<PING>
Of course!
Ehm... the junk file detection thingy looks into ALL directories currently. And then it sees several versions of the same file, thus increasing the junk file amount!
... the best way of solving this is to let go of the junk file thingies and use the ADL Search (forbidden file option), since ADL Search is a) easier to configure and b) will result in that the filenames will be presented to the user.
But I'll see if there is some easy way of checking if a directory is an ADL Search directory and excluding 'em from the junk file search.
OLDoMiNiON:
No, the value is (I think) the amount of time to wait between every user.
Sarf
---
This is precisely the sort of thing that people who like this sort of thing will like.
Hmm... strange.
<PING>
Of course!
Ehm... the junk file detection thingy looks into ALL directories currently. And then it sees several versions of the same file, thus increasing the junk file amount!
... the best way of solving this is to let go of the junk file thingies and use the ADL Search (forbidden file option), since ADL Search is a) easier to configure and b) will result in that the filenames will be presented to the user.
But I'll see if there is some easy way of checking if a directory is an ADL Search directory and excluding 'em from the junk file search.
OLDoMiNiON:
No, the value is (I think) the amount of time to wait between every user.
Sarf
---
This is precisely the sort of thing that people who like this sort of thing will like.
Response and v0.25105594k
Yes, Indrid, getting rid of ML Donkey clients will stop most of those messages.
If DC++k is set to chat only it CAN'T download filelists (nor anything else), it is chat only. Alright?
Oh, and yet another version hits the shelves :
Sarf
---
In this world, truth can wait; she's used to it.
If DC++k is set to chat only it CAN'T download filelists (nor anything else), it is chat only. Alright?
Oh, and yet another version hits the shelves :
Code: Select all
-- 0.25105594k --
* Fixed so that the junk file check does not check ADL Search directories
thanks to BSOD2600 for reporting this one!
---
In this world, truth can wait; she's used to it.
I don´t think you will get rid of these message because, DC++k finds mldc faster then the script.is the solution to get rid of these message an anti-mldc script? or can it ignored somehow?
This is your OP MrLinkan© at [Sweden][Örebro][DC++ Network]
Good night, Örebro.... wherever you are....
Good night, Örebro.... wherever you are....
-
- Posts: 96
- Joined: 2003-04-18 05:57
- Location: Oporto, Portugal
- Contact:
Hi!!!
Is there away so I can give access to, say a special nickname, so he could use this commands in private with dc++k: /addforbiddenfiles; /removeforbiddenfiles; /showforbidden; /checkshare; /stopcheckshare; /startcontinuouschecking;
/stopcontinuouschecking; /reportcheaters.
I’m suggesting this, because now I have my dc++k in another machine and if I had those commands accessible by remote it would be much easier.
Thanks and keep up the great work,
[PT]Devilishly
Is there away so I can give access to, say a special nickname, so he could use this commands in private with dc++k: /addforbiddenfiles; /removeforbiddenfiles; /showforbidden; /checkshare; /stopcheckshare; /startcontinuouschecking;
/stopcontinuouschecking; /reportcheaters.
I’m suggesting this, because now I have my dc++k in another machine and if I had those commands accessible by remote it would be much easier.
Thanks and keep up the great work,
[PT]Devilishly
oDCk
I would really like a k version of the DC++ mod oDC..
or atleast that neat nick search feature it has..
or atleast that neat nick search feature it has..
http://whyrar.omfg.se - Guide to RAR and DC behaviour!
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
This is because the byte size check is done BEFORE any filelists are downloaded, right when DC++k recieves the MyInfo from any user.Indrid wrote:also i set my dc++k client to /chatonly and it keep kicking ppl but i didnt see any file lists being d/led.
If you don't want it to kick I suggest you turn this feature off in settings\advanced\Consider too even share to be cheating.
http://whyrar.omfg.se - Guide to RAR and DC behaviour!
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
Great suggestion! If sarf decides to implement this, maybe he could add some other triggers too[PT]Devilishly wrote:Is there away so I can give access to, say a special nickname, so he could use this commands in private with dc++k: [PT]Devilishly
Maybe this could be put together with the "exclude users from check"-modding of "favorite users".. one *Exclude from check-box and one *Accept remote commands-box
http://whyrar.omfg.se - Guide to RAR and DC behaviour!
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
Currently, there is no easy way to implement remote-commands. Well, I could do a quick fix to get some of the commands working in five minutes flat, but due to how the commands are implemented, I can't do all the commands (more specifically : any commands that require access to the hub window object or who returns information in the form of strings) due to how the commands are implemented). Also, it is much easier (at least for me ) if you use a good third-party remote administration tool - TightVNC is a good one, just make sure that you use 8 bits, JPEG encoding with low quality and you should experience no problems.
Sarf
---
"There are many questions which fools can ask that wise men cannot answer." - George Polya (1887-1985)
Sarf
---
"There are many questions which fools can ask that wise men cannot answer." - George Polya (1887-1985)
-
- Posts: 96
- Joined: 2003-04-18 05:57
- Location: Oporto, Portugal
- Contact:
sarf wrote:Also, it is much easier (at least for me ) if you use a good third-party remote administration tool - TightVNC is a good one, just make sure that you use 8 bits, JPEG encoding with low quality and you should experience no problems.
Thanks, maybe that will solve my problem
Best regards,
[PT]Devilishly
Hello all!
1. I'm having troubles with doing some good user commands to the right click-menu. This is what I'm trying to do:
And this is what I get in the main window:
The thing I want with this one is to get the part that Gatekeeper says in the middle bar (under main chat) and not in the chat. And I also dont like the command visible in main. I would like it to work like the built in kick command that only kick and puts the "[OP]R200 is kickin xxx because: something"
Is there something wrong with the command or is it just like that?
2. The raw-command would be nice to be able to get to the user commands. eg. $kick and all other $-things
3. Would be nice to have some functions and user commands in the filelist-view too. I don't always know what I search for so I download an userlist and check it manually and if I find something "illegal" I would now have to manually "copy" the filename to the search-window and from there execute my commands. At least oDC has the copy-function in right-click menu with options for what to copy eg. filename, nick, path...
But the user-commands would be nice to have in the filelist-view directly.
4. The "Automatically check filelist on new users" function should have an option to be only enabled when I'm an op so that I wouldn't have to uncheck it whenever I connect to an other hub were I'm only a normal user.
5. Is there some "all-in-1 list of commands" available where would be all commands listed eg /addforbiddenfiles, /checkshare and all the other commands starting with /?
They are now spread all over in the features-lists and some are on the web on your features-webpage.
Thats all what I had in mind for now, can't really remember anything else at this point, took me too long to write all these things down...
You are doing very good with all these releases of yours, keep up the good work!
1. I'm having troubles with doing some good user commands to the right click-menu. This is what I'm trying to do:
Code: Select all
kick %[nick] Don't share installed files (%[file])
Code: Select all
<Gatekeeper> The user 'xxxx' was fucked by [OP]R200 because: don't share installed files (g:\sierra\half-life\install.log). His IP was: xxx.xxx.xxx.xxx
[16:12] <[OP]R200> kick xxxx Don't share installed files (g:\Sierra\Half-Life\INSTALL.LOG)
Is there something wrong with the command or is it just like that?
2. The raw-command would be nice to be able to get to the user commands. eg. $kick and all other $-things
3. Would be nice to have some functions and user commands in the filelist-view too. I don't always know what I search for so I download an userlist and check it manually and if I find something "illegal" I would now have to manually "copy" the filename to the search-window and from there execute my commands. At least oDC has the copy-function in right-click menu with options for what to copy eg. filename, nick, path...
But the user-commands would be nice to have in the filelist-view directly.
4. The "Automatically check filelist on new users" function should have an option to be only enabled when I'm an op so that I wouldn't have to uncheck it whenever I connect to an other hub were I'm only a normal user.
5. Is there some "all-in-1 list of commands" available where would be all commands listed eg /addforbiddenfiles, /checkshare and all the other commands starting with /?
They are now spread all over in the features-lists and some are on the web on your features-webpage.
Thats all what I had in mind for now, can't really remember anything else at this point, took me too long to write all these things down...
You are doing very good with all these releases of yours, keep up the good work!
DC++k Guide
I have written a little DC++k Guide, plz give me comments/suggestions etc.
http://whyrar.omfg.se - Guide to RAR and DC behaviour!
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
good suggestion, shouldn't be that hardR200 wrote:5. Could all those /-commands be put together with all the other /-commands in the list that I get when I type /help in main chat-window?
http://whyrar.omfg.se - Guide to RAR and DC behaviour!
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
Sorry, but I can't make heads or tails of this one.R200 wrote:The thing I want with this one is to get the part that Gatekeeper says in the middle bar (under main chat) and not in the chat.
Well, then you should be able to use the built in kick command thingies. The problem is probably due to a lack of understanding how DC++ does a normal kick.R200 wrote:And I also dont like the command visible in main. I would like it to work like the built in kick command that only kick and puts the "[OP]R200 is kickin xxx because: something"
If I have to choose, then the command is "just like that".R200 wrote:Is there something wrong with the command or is it just like that?
Yes, but this would necessitate "breaking" old commands, since the user commands are pre-formatted (and thus not raw).R200 wrote:2. The raw-command would be nice to be able to get to the user commands. eg. $kick and all other $-things
I'll consider it.R200 wrote:3. Would be nice to have some functions and user commands in the filelist-view too.
[snip]
Perhaps. On the other hand, the continous checking is what people are supposed to use (damn! and it should work, too!).R200 wrote:4. The "Automatically check filelist on new users" function should have an option to be only enabled when I'm an op so that I wouldn't have to uncheck it whenever I connect to an other hub were I'm only a normal user.
No.R200 wrote:5. Is there some "all-in-1 list of commands" available where would be all commands listed eg /addforbiddenfiles, /checkshare and all the other commands starting with /?
[snip]
The commands I have added are :
Code: Select all
/versionoverride
/chatonly
/officialslots or /publicslots
/checkshare
/stopcheckshare
/cheatingreport
/raw or /rawsend
/multe
/startcontinuouschecking or /startchecking
/stopcontinuouschecking or /stopchecking
/showforbiddenfile or /showforbidden
/addforbiddenfile or /addforbidden
/removeforbiddenfile or /removeforbiddenfile
/filelistmaximumallowedsize or /filelistmaximumallowed or /filelistallowedsize or /filelistmaximum or /filelistallowed
Yes. I probably won't, as I am too lazy to do it.R200 wrote:5. Could all those /-commands be put together with all the other /-commands in the list that I get when I type /help in main chat-window?
Sarf
---
Rose tint my world and keep me safe from the trouble and pain...
about using raw commands in user commands, sarf, can't you just remove the $ & | check in the command textbox, then we can use /raw <string> and send it to main chat??
http://whyrar.omfg.se - Guide to RAR and DC behaviour!
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
hmmm... Thanks
There is the bar in the middle of the whole dc++k, called statusbar I think, and thats the place I want those kicking messages to be.
Just like in the integrated kick command in right-click menu, the bot responses in the statusbar.
Is it mainly because the user commands are kick or !kick (or whatever) and the the raw-command is $kick which I cannot use in user commands?
Now I couldn't make heads or tails off your answer...
I still thank you for your answers......
What I was trying to say is that I don't want the bot's kicking response to be visible in the main chat either as I don't want my kick-command there.R200 wrote:
The thing I want with this one is to get the part that Gatekeeper says in the middle bar (under main chat) and not in the chat.
sarf wrote:
Sorry, but I can't make heads or tails of this one.
There is the bar in the middle of the whole dc++k, called statusbar I think, and thats the place I want those kicking messages to be.
Just like in the integrated kick command in right-click menu, the bot responses in the statusbar.
Is it mainly because the user commands are kick or !kick (or whatever) and the the raw-command is $kick which I cannot use in user commands?
Well, then you should be able to use the built in kick command thingies. The problem is probably due to a lack of understanding how DC++ does a normal kick.
Now I couldn't make heads or tails off your answer...
I still thank you for your answers......
That is your hub software/scripts that control the command responses, nothing sarf can do anything about I think. About that you kick command shows in main chat, don't you have a bot you can send it to instead?R200 wrote:What I was trying to say is that I don't want the bot's kicking response to be visible in the main chat either as I don't want my kick-command there.
http://whyrar.omfg.se - Guide to RAR and DC behaviour!
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
-
- Posts: 25
- Joined: 2003-01-31 21:50
-
- Posts: 42
- Joined: 2003-01-03 10:04
-
- Posts: 202
- Joined: 2003-01-06 06:22
- Location: Salford, England.
- Contact:
v0.25105595k
R200:
Currently, when I post things to the "chat", I can't seperate kick things. I understand if this is a problem - if so, try the "Suppress cheating messages" which will work (but will not give any output at all).
What I meant was that you can send a $Kick message, and if your hubsoft gives any output then I am sorry, but that's not my fault.
cyberal:
Indeed, using /raw in the user commands would be a neat way of solving this problem. <PING> Added to the newest version. Will work as expected if you do not send the command to a user, in which case it will send a PM containing your raw data.
OLDoMiNiON:
Yes. This will be looked into when I... <ahem> make the time. I still stand by my previous statements - it should work.
New version out! Changelog :
I'm sure there are nasty bugs in this one, but right now I wanna sleep. Tomorrow is slomo day! Don't expect any frequent updates. If you want a "working" version, go to the working client version page. Enjoy!
Sarf
---
Due to circumstances within our control, tomorrow will be cancelled.
Currently, when I post things to the "chat", I can't seperate kick things. I understand if this is a problem - if so, try the "Suppress cheating messages" which will work (but will not give any output at all).
What I meant was that you can send a $Kick message, and if your hubsoft gives any output then I am sorry, but that's not my fault.
cyberal:
Indeed, using /raw in the user commands would be a neat way of solving this problem. <PING> Added to the newest version. Will work as expected if you do not send the command to a user, in which case it will send a PM containing your raw data.
OLDoMiNiON:
Yes. This will be looked into when I... <ahem> make the time. I still stand by my previous statements - it should work.
New version out! Changelog :
Code: Select all
-- 0.25105595k --
* Discovered that some abusable commands were still enabled
enabled the reporting of 'em - sorry for this one!
* Added /help entries for the new commands
thanks to R200 for inspiring me to do this!
* Added /raw (and /rawsend) command capability to user commands
beware - use this AT YOUR OWN RISK! All "normal" %[] are available as usual
thanks to cyberal and everyone else for suggesting this!
* Updated the homepage links, may give some people an easier time browsing my site
thanks again to cyberal!
* Fixed so that the forbidden files property is loaded and saved!
thanks to spookie for this one!
Sarf
---
Due to circumstances within our control, tomorrow will be cancelled.
ok, but still there is the original Kick command in the usermenu that does it the way I like it.cyberal wrote:That is your hub software/scripts that control the command responses, nothing sarf can do anything about I think. About that you kick command shows in main chat, don't you have a bot you can send it to instead?R200 wrote:What I was trying to say is that I don't want the bot's kicking response to be visible in the main chat either as I don't want my kick-command there.
Thanks for adding the raw-command possibility into the user-menu, but...sarf wrote:R200:
Currently, when I post things to the "chat", I can't seperate kick things. I understand if this is a problem - if so, try the "Suppress cheating messages" which will work (but will not give any output at all).
What I meant was that you can send a $Kick message, and if your hubsoft gives any output then I am sorry, but that's not my fault.
I'm using this command now:
Code: Select all
/raw <%[mynick]> %[mynick] is kicking %[nick] because: Incomplete file (%[file])|$kick %[nick]
WONDERFUL sarf!
/raw in user commands works like a charm, just tested it..
finally I can make preset kicks... yessss
I use this as command:
/raw $To: %[nick] From: %[mynick] $<%[mynick]> my cool kick msg|$kick %[nick]|
NO MSG i main
Great job sarf!
/raw in user commands works like a charm, just tested it..
finally I can make preset kicks... yessss
I use this as command:
/raw $To: %[nick] From: %[mynick] $<%[mynick]> my cool kick msg|$kick %[nick]|
NO MSG i main
Great job sarf!
http://whyrar.omfg.se - Guide to RAR and DC behaviour!
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
Hmmm, let's say I'm still using this script:cyberal wrote:That is your hub software/scripts that control the command responses, nothing sarf can do anything about I think. About that you kick command shows in main chat, don't you have a bot you can send it to instead?
Code: Select all
kick %[nick] Don't share installed files (%[file])
Could this work now that /raw is possible:
Code: Select all
$To Bot $<%[mynick]> kick %[nick] Don't share installed files (%[file])
oh crap, I forgot to put the last | in my command, thats why it didn't work!cyberal wrote:WONDERFUL sarf!
/raw in user commands works like a charm, just tested it..
finally I can make preset kicks... yessss
I use this as command:
/raw $To: %[nick] From: %[mynick] $<%[mynick]> my cool kick msg|$kick %[nick]|
NO MSG i main
Great job sarf!
Thanks cyberal for pasting in your command...
No, it still doesn't work:
Am I missing something? The first part works fine, but the kick never happens...
Correction to my earlier post:
How am I supposed to be able to send it to the bot when I'm in the search window where the file is and clicked the user and selecting the user-command?
Code: Select all
/raw <%[mynick]> %[mynick] is kicking %[nick] because: Incomplete file (%[file])|$kick %[nick]|
Correction to my earlier post:
The question should be:Hmmm, let's say I'm still using this script:
Code:
kick %[nick] Don't share installed files (%[file])
How am I supposed to be able to send it to the bot when I'm in main chat and clicked the user and selecting the user-command?
How am I supposed to be able to send it to the bot when I'm in the search window where the file is and clicked the user and selecting the user-command?
Like the /raw feature very much sarf .. very nicely done
/raw <%[mynick]> %[mynick] is kicking %[nick] because: Incomplete file (%[file])|$Kick %[nick]|
But i dont really see why you wanna use that command .. cuz its the same kind a kick when you just use the integrated Kick user command
$To: Botname From: %[mynick] $<%[mynick]> kick %[nick] Don't share installed files (%[file])|
Assuming your bot accepts the "kick" command send to him
You need to change the $kick to $Kick .. with an capital K so like this:No, it still doesn't work:
Code:
/raw <%[mynick]> %[mynick] is kicking %[nick] because: Incomplete file (%[file])|$kick %[nick]|
Am I missing something? The first part works fine, but the kick never happens...
/raw <%[mynick]> %[mynick] is kicking %[nick] because: Incomplete file (%[file])|$Kick %[nick]|
But i dont really see why you wanna use that command .. cuz its the same kind a kick when you just use the integrated Kick user command
Try this:The question should be:
How am I supposed to be able to send it to the bot when I'm in the search window where the file is and clicked the user and selecting the user-command
$To: Botname From: %[mynick] $<%[mynick]> kick %[nick] Don't share installed files (%[file])|
Assuming your bot accepts the "kick" command send to him
ÜndèrGrøund® Ñètwø®k
http://www.udgnet.com
http://www.udgnet.com
Double post
/raw $To: Botname From: %[mynick] $<%[mynick]> kick %[nick] Don't share installed files (%[file])|
That would be$To: Botname From: %[mynick] $<%[mynick]> kick %[nick] Don't share installed files (%[file])|
/raw $To: Botname From: %[mynick] $<%[mynick]> kick %[nick] Don't share installed files (%[file])|
ÜndèrGrøund® Ñètwø®k
http://www.udgnet.com
http://www.udgnet.com
Thanks for the Capital K info, that solves my problem with that one.You need to change the $kick to $Kick .. with an capital K so like this:No, it still doesn't work:
Code:
/raw <%[mynick]> %[mynick] is kicking %[nick] because: Incomplete file (%[file])|$kick %[nick]|
Am I missing something? The first part works fine, but the kick never happens...
/raw <%[mynick]> %[mynick] is kicking %[nick] because: Incomplete file (%[file])|$Kick %[nick]|
But i dont really see why you wanna use that command .. cuz its the same kind a kick when you just use the integrated Kick user command
The reason for me to use that one is that I get the path to the file in the reason so that I dont have to write it there manually.
Next problem:
This command does the response in main and it does kick but the pm never goes anywhere. The user never gets to see why he/she has been kicked.
Would it possible to make a delay-command to be used in commands eg. or
so that there would be an delay between different commands.
Either that I would have to set the time manually (ms) or only an integrated wait-period of 500ms (command would be then only $wait)
The point with this one would be to give time for the kicked user to see what he is being kicked for.
I just love the /raw thing, nice to experiment with different user-commands...
2nd problem: What is it with those users with 0 byte share that gets in, they don't get kicked and the filelist won't be checked from them at all? I always have to manually get rid of them.
Code: Select all
/raw $To: %[nick] From: %[mynick] $<%[mynick]> You are being kicked because: Incomplete files (%[file])|<%[mynick]> %[mynick] is kicking %[nick] because: Incomplete files (%[file])|$Kick %[nick]|
Would it possible to make a delay-command to be used in commands eg.
Code: Select all
$wait 500|
Code: Select all
$wait %[line:Time]|
Either that I would have to set the time manually (ms) or only an integrated wait-period of 500ms (command would be then only $wait)
The point with this one would be to give time for the kicked user to see what he is being kicked for.
I just love the /raw thing, nice to experiment with different user-commands...
2nd problem: What is it with those users with 0 byte share that gets in, they don't get kicked and the filelist won't be checked from them at all? I always have to manually get rid of them.
I am currently working with adding $Wait <ms> and $Delay <ms> (the same command, really, but why not?). This will not be added to the fake share command currently due to different command handling (as well as the hope that I won't break that command, too).
While you wait for $Delay command capabilities, you might consider using a kick-bot of some kind, since it should be able to kick people (including IP-banning them if you have a good hub software).
Zero-byte users? No idea. If they do not get checked, it might be because you have the "Do not check users with zero byte shares" option enabled. I'd recommend using a minshare script to take care of them.
Sarf
---
Don't force it, use a bigger hammer.
While you wait for $Delay command capabilities, you might consider using a kick-bot of some kind, since it should be able to kick people (including IP-banning them if you have a good hub software).
Zero-byte users? No idea. If they do not get checked, it might be because you have the "Do not check users with zero byte shares" option enabled. I'd recommend using a minshare script to take care of them.
Sarf
---
Don't force it, use a bigger hammer.
Ok, nicesarf wrote:I am currently working with adding $Wait <ms> and $Delay <ms> (the same command, really, but why not?). This will not be added to the fake share command currently due to different command handling (as well as the hope that I won't break that command, too).
I have a good and kicking bot, but that wasn't the point.sarf wrote:While you wait for $Delay command capabilities, you might consider using a kick-bot of some kind, since it should be able to kick people (including IP-banning them if you have a good hub software).
I don't have that option enabled and I do have a minshare of 1 GB and everything between 1 byte to 999 MB is being kicked but the ones with 0 bytes stays there hanging.[/quote]sarf wrote:Zero-byte users? No idea. If they do not get checked, it might be because you have the "Do not check users with zero byte shares" option enabled. I'd recommend using a minshare script to take care of them.
Really? Why not use that to kick users then? The $Wait/$Delay things are only good for kicking, as far as I know, so there no other reasons for them to exist.R200 wrote:I have a good and kicking bot, but that wasn't the point.
Then you should check out your bot. The hubs and scripts section of these forums are good for that kind of things.R200 wrote:I don't have that option enabled and I do have a minshare of 1 GB and everything between 1 byte to 999 MB is being kicked but the ones with 0 bytes stays there hanging.
Sarf
---
Often I think I am a special agent of Billy Graham.
v0.25105597k
New version! Lots of fixes in this one...
Changelog :
Please, tell me this one is bug-free...
Sarf
---
Blessed are they that run around in circles, for they shall be known as wheels.
Changelog :
Code: Select all
-- 0.25105597k --
* Note that in the previous version (0.25105596k) I added so that the
"forbidden" ADL Search property was saved
* Fixed so that you can download filelists from users with *some*
strange characters in their nicks
thanks everyone that suggested this - I didn't think it would be so easy!
(credits to arnetheduck for making simple and good code!)
* Added the ability to consider "Could not open target file..." a cheat
this MAY cause false positives, but if so, should do it on ALL you check
thanks to the same everyone as above!
* Fixed the end-line characters still present in the forbidden files thingy
also fixed so that "..." will only be added if there are other forbidden files
* As you can see, yours truly has gotten off his bum to do some real testing
and gotten some things fixed - much easier to fix things when I can
test them myself - I have to do this more often!
* Finally fixed the bug that caused ADL Search forbidden files to fail to
trigger the forbidden files cheating! A small logic error was the culprit.
The offending code has been terminated with extreme prejudice and replaced
with new, patriotic code. All hail Eris!
thanks to everyone who reported this bug!
-- 0.25105596k --
* Added BETA "$Delay <ms>" and "$Wait <ms>" command support to the user commands
they will wait for the specified amount of time and then continue
thanks everyone that suggested this!
* Updated the design of the features pages with the new design by Atomic Jo!
all credits to (you guessed it) Atomic jo!
Sarf
---
Blessed are they that run around in circles, for they shall be known as wheels.
Ok this game is called Spot The Donkey
Think there is something wrong with refreshing of userlist .. i had about 200 mldonkey in my userlist .. they were gone after i did an manual refresh of the userlist
Think there is something wrong with refreshing of userlist .. i had about 200 mldonkey in my userlist .. they were gone after i did an manual refresh of the userlist
ÜndèrGrøund® Ñètwø®k
http://www.udgnet.com
http://www.udgnet.com
I think its more a bug with NMDC Hub. I'm not sure why, but non-standard clients seem to "get stuck" in DC++/NMDC 2 user lists. A simple refresh clears the absent clients out...XeroXâ„¢ wrote:Think there is something wrong with refreshing of userlist .. i had about 200 mldonkey in my userlist .. they were gone after i did an manual refresh of the userlist
i have the same problem and thats on two hubs running onXeroXâ„¢ wrote:Ok this game is called Spot The Donkey
Think there is something wrong with refreshing of userlist .. i had about 200 mldonkey in my userlist .. they were gone after i did an manual refresh of the userlist
*PtokaX DC Hub 0.3.2.4 IceCube IV build 1*
*PtokaX DC Hub 0.3.2.4 IceCube III Fix3*
and the latest dc++k client version 0.25105597-k
version 0.25105595-k works just fine good work love this client
YEAH!
Looking good ppl!
Some Q:
1. Is anyone else experiencing problems with the "no slots despite DC++"-feature, alot of innocent users are beeing kicked over here, seems like DC++ somtimes says "no slots" once before letting the user load their list, DC++ bug?
2. Does anyone know if DC++k does anything upon recieving "file not available" on a filelist (the user manually deleted his list).
3. Anyone else that have problems with checked users NOT turning green?
4. Still problems with forbidden files, sometimes works, sometimes not.. weird.
Looking good ppl!
Some Q:
1. Is anyone else experiencing problems with the "no slots despite DC++"-feature, alot of innocent users are beeing kicked over here, seems like DC++ somtimes says "no slots" once before letting the user load their list, DC++ bug?
2. Does anyone know if DC++k does anything upon recieving "file not available" on a filelist (the user manually deleted his list).
3. Anyone else that have problems with checked users NOT turning green?
4. Still problems with forbidden files, sometimes works, sometimes not.. weird.
http://whyrar.omfg.se - Guide to RAR and DC behaviour!
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
v0.25105598k
New version out.
Changelog :
Forbidden files checking works over here. There has been problems (DC++k client being quitting the hub it had joined) reported if you search for a string with two ADL Searches, once with source type filename and second time with source type directory.
I think this is something regarding ADL Search, and since I do not know enough about that I can't help you currently.
Sarf
---
Money is truthful. When a man speaks of honor, make him pay cash.
Changelog :
Code: Select all
-- 0.25105598k --
* Caved in to the demands and created a seperate page for all the
checkboxes pertaining to cheating
* Moved some options from the "DC++k Detector" page to the
"DC++k Detector 2" page in the settings
* Probably fixed the user commands thingy
thanks to every last one that reported this one!
* Fixed the bugs associated with selecting in the public hub list window
my bad, I had made a small error while changing things around
thanks to LaXu1 for reporting this!
* Added an option to remove ML Donkey clients
they should be removed from the user list
if you are an OP, you will kick them as well
(insulting them on their way out)
thanks to everyone that suggested this!
* Added an option to remove ML Donkey clients silently
some of you might not want to flood the chat
this option is also marginally faster
this option will (surprise!) kick the Donkey clients silently
* Added BETA BETA BETA support for opening downloaded filelists of users
Please do NOT report bugs in this features!
thanks to Gratch06 for this absolutely splendid idea!
* May have fixed the "slot-hogging" of the list checker
thanks to cyberal for continually nagging me about this! ;-)
* Due to the my ISPs going down, this release was delayed a while
perhaps that was a good thing, since I got some "nice" options done
I think this is something regarding ADL Search, and since I do not know enough about that I can't help you currently.
Sarf
---
Money is truthful. When a man speaks of honor, make him pay cash.
1. I don't know.cyberal wrote:YEAH!
Looking good ppl!
Some Q:
1. Is anyone else experiencing problems with the "no slots despite DC++"-feature, alot of innocent users are beeing kicked over here, seems like DC++ somtimes says "no slots" once before letting the user load their list, DC++ bug?
2. Does anyone know if DC++k does anything upon recieving "file not available" on a filelist (the user manually deleted his list).
3. Anyone else that have problems with checked users NOT turning green?
4. Still problems with forbidden files, sometimes works, sometimes not.. weird.
2. I don't know.
3. Yes
4. Me too
Having problems with 0.25105598k, getting unhandled exceptions all the time.
Yes I did send an email about it including the txt file but the description is false. It does crash even if I don't do anything at all.
feature suggestiono
Hi Sarf,
how do you think about to implent an ALIAS function of the commands available in dc++k?
what I mean is, that we have the opportunity, to create our own ALIASES for specific commands,e.g.
instead to type: /versionoverride we only need to type /vo
of course, this has to be individual, which means he can choose and create whatever alias for that specific command /versionoverride
another example, instead: /startcontinuouschecking we just need to type: /scc to execute that command, or /sc ...or whatever...
we of course have to define the aliases first just like in mirc ...I only thought some commands are soooooo long....e.g. /filelistmaximumallowedsize
I hope you got what I tried to explain
MaZaKa98
ps: feedback appreciated
how do you think about to implent an ALIAS function of the commands available in dc++k?
what I mean is, that we have the opportunity, to create our own ALIASES for specific commands,e.g.
instead to type: /versionoverride we only need to type /vo
of course, this has to be individual, which means he can choose and create whatever alias for that specific command /versionoverride
another example, instead: /startcontinuouschecking we just need to type: /scc to execute that command, or /sc ...or whatever...
we of course have to define the aliases first just like in mirc ...I only thought some commands are soooooo long....e.g. /filelistmaximumallowedsize
I hope you got what I tried to explain
MaZaKa98
ps: feedback appreciated
...with great power...comes great responsibilities...
DC++k Detector 2
YYYYYYYYYEEEEEEEEEEEESSSSSSSSSSS!!!!!!
Lovely sarf!
YYYYYYYYYEEEEEEEEEEEESSSSSSSSSSS!!!!!!
Lovely sarf!
http://whyrar.omfg.se - Guide to RAR and DC behaviour!
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet
http://bodstrom.omfg.se - Bodströmsamhället, Länksamling om hoten mot vår personliga integritet