Connection refused by target machine ????????

Dr.Hoffmann · Post by **Dr.Hoffmann** » 2003-09-03 15:30

whats that means???
how do i connect to my hub?

TheNOP · Post by **TheNOP** » 2003-09-03 15:44

whats that means???

no puter replys/request blocked, did you start your hub ?

how do i connect to my hub?

on same puter ? use localhost (127.0.0.1)

Dr.Hoffmann · Post by **Dr.Hoffmann** » 2003-09-03 16:08

i think i start my hub i downloaded Direct Connect Hub (v1.0) and installed it ....i wrote the name of the hub and descriptions and ...nothing
im trying to connect to trhe address that write to my vandel405.dynip.com
and the masseg that show me is the one i showed u .
so if ya think i did some thing wrong in my install tell me please...

Charalambos · Post by **Charalambos** » 2003-09-03 16:13

There are several possibi.lities that come into my mind what you could have done wrong.

- Updated your dynamic dns name?

- Used right port to connect?

- Firewall or Router that could be blocking?

- ...

Please give us more info about what you've done and what not.

Dr.Hoffmann · Post by **Dr.Hoffmann** » 2003-09-03 16:18

- Updated your dynamic dns name?

- Used right port to connect?

how do i do update for the dynamic dns name?? i need to choose adns name?
what port am i need?

Charalambos · Post by **Charalambos** » 2003-09-03 16:36

Oh man... what a mess. I'm not sure anymore if we're talking about the same thing.

Well,
vandel405.dynip.com = dynamic dns address

This needs to be updated permanently to lead to your present ip (if dynamic ip).

Now, you've got to tell what you've done so far.

Dr.Hoffmann · Post by **Dr.Hoffmann** » 2003-09-03 16:40

all i'v done is to install the program ...i try to find instructions but i havent
found any so im sorry if im bugging u but....whats next?

Charalambos · Post by **Charalambos** » 2003-09-03 16:57

Well, if you'd really searched, you've found plenty of info.
But anyway.

What you've got so far is installed the hub software and got a dyndns.
Thats pretty much all you need.

I'm not an expert in running a hub, but i what you have to do is leading the dyndns to your ip (means to your comp and finally to your hub).
For this purpose, you need a tool that synchronises your dns with your ip.

If you've got a router, you can very probable do that there, if not you can use a tool like DeeEnEs.

mmhh, i'm too tired to think

I suggest you to search the forum for already existing posts about this topic, you will surely find some info and instructions on how to set up your hub.

Good luch...

TheNOP · Post by **TheNOP** » 2003-09-03 18:45

vandel405.dynip.com is in there by default (hub setting) it is for registering a hub to a hub list.

Dr.Hoffmann did you actualy clic on "start serving" button ?

in DC connect to your hub by entering " 127.0.0.1:411 " in "manual connect address".(use what is show in "listening port" in hub setting)
in this case 411 must be the port show in "listening port" in hub setting.

in hub setting "my IP address" must be the IP of puter that the hub is running on, or DNS addy like yournameaddy.no-ip.com if you want others to be able to connect to your hub. (need to register an account with them before using it) .

[/quote]

Dr.Hoffmann · Post by **Dr.Hoffmann** » 2003-09-04 06:42

ok....i'v done what u wrote to me and its work

im in my hub....so first of all thanks.
now....how do i enter Bot to there and how do i put my self as an op and
play with all the command? am i need to scripting?

Charalambos · Post by **Charalambos** » 2003-09-04 07:27

No, you dont have to write scripts yourself.

Have a look at the "Sticky: Hub Script site list" post under section "Hubs and scripts".

You'll surely find there what you're looking for.

DC++

Connection refused by target machine ????????

Connection refused by target machine ????????

hrmmmmmm