dcc works great, just one little problem with "too many

mauisun · Post by **mauisun** » 2004-08-22 10:41

I am running version0.3.32 and everything seems to be running fine, a glitch every now and then but basically up and running with 40 members to start.
I have a couple of members who are being told they are on Too many Hubs to connect to my hub. I don't see any settings there to force a max amount of hubs any user can be on, I don't care how many other hubs they are attached to, can someone point out to me where I can change that setting? thanks for some great software folks
....mauisun

mauisun · Post by **mauisun** » 2004-08-22 10:56

found the answer to my own question in the settings. was set to a max of 5. is there any reason why I cannot set it to say 50? it should not matter how many other hubs a person is connected to when they are connected to my hub correct? thanks for the time
.mauisun

TheNOP · Post by **TheNOP** » 2004-08-22 12:12

0.3.32... seem to be SDCH hubsoft.

the default is 50 in interactions-->User Controls-->Require less then [ xx ] simultanious hubs.

make sure you clear the field compleatly before trying to write 50 in it.
use backspace and delete keys.

mauisun · Post by **mauisun** » 2004-08-22 12:19

yes, that is the setting, got it working now. and yes it is the sdch softhub. is that the recommended hubsharing software or ias there some other I should be looking into> thanksfor the help
..mauisun

TheNOP · Post by **TheNOP** » 2004-08-23 14:56

mauisun wrote: is that the recommended hubsharing software

yes...

mauisun wrote: or ias there some other I should be looking into> thanksfor the help
..mauisun

no

p.s. comming from a beta tester of SDCH, what would you expect as a reply.

faqs are, SDCH is what i consider the best for me.