which HUB?

Problems compiling? Don't understand the source code? Don't know how to code your feature? Post here.

Moderator: Moderators

Locked
giszo
Posts: 6
Joined: 2006-05-17 04:01

which HUB?

Post by giszo » 2006-05-17 04:05

Hi!

I just started to code my own direct connect client from scratch and i'd like to ask some help.
I've done a part of the hub connection implementation and i'd like to test it. My question is: which hub software you suggest to use for testing that runs under Linux?

Thanks, giszo

ullner
Forum Moderator
Posts: 333
Joined: 2004-09-10 11:00
Contact:

Post by ullner » 2006-05-17 05:07

If you're working on a NMDC client, Verlihub would probably be sufficient.
If you're working on a ADC client, adc://dcdev.no-ip.org:16591 is at your disposal.

giszo
Posts: 6
Joined: 2006-05-17 04:01

Post by giszo » 2006-05-17 06:03

Ok, thx!
I'm going to have a look at Verlihub.

giszo

joakim_tosteberg
Forum Moderator
Posts: 587
Joined: 2003-05-07 02:38
Location: Sweden, Linkoping

Post by joakim_tosteberg » 2006-05-18 13:24

If you would be interessed in making capable of the new ADC protocol as well is the protocol documentation available at http://dcplusplus.sourceforge.net/ADC.html

imb
Posts: 99
Joined: 2004-06-15 17:48
Location: England

Post by imb » 2006-05-18 13:33

I notice you can only run ADC hubs on linux atm. How is this ADC turning out? And when do you reckon there'll be a windows ADC hub?

joakim_tosteberg
Forum Moderator
Posts: 587
Joined: 2003-05-07 02:38
Location: Sweden, Linkoping

Post by joakim_tosteberg » 2006-05-18 13:40

Actually there is an ADC hub for windows that I know of, dchsharp (there migh be more of them). Let's see, where did I put that address...
There it was, http://sourceforge.net/projects/dchsharp. Seems like you only can get it through SVN (https://svn.sourceforge.net/svnroot/dchsharp/trunk) and then compile it yourslef though.

ullner
Forum Moderator
Posts: 333
Joined: 2004-09-10 11:00
Contact:

Post by ullner » 2006-05-19 04:15

Vaulthub run fine on Windows.

imb
Posts: 99
Joined: 2004-06-15 17:48
Location: England

Post by imb » 2006-05-19 09:54

Not sure how to compile. That Vaulthub didn't seem to need compiling, but it has no download link.

Pasqualle
Posts: 21
Joined: 2006-05-06 14:43

Post by Pasqualle » 2006-05-21 05:23

here is a nice list of dc hubs:

http://www.dslreports.com/faq/6545

Locked