$MyINFO

jauninjais · Post by **jauninjais** » 2003-07-13 13:37

can someone explain what V:0.25,M:P,H:2/0/0,S:18 means!

TheParanoidOne · Post by **TheParanoidOne** » 2003-07-13 13:51

From the FAQ: The meaning of the <++ tag.

The H bit is in the FAQ is out of date though.

The 0.24 Changelog wrote:* Updated H: tag. It now looks like H:x/y/z where x, y, and z are normal, registered and op hubs respectively. It is updated roughly once a minute, but if you're disconnected, the count won't go down until the window is closed (i e hubs you're trying to reconnect to count as well, to avoid too many updates being sent to the hub). Also, note that there's a problem with the op count. All op's will first be counted as registered users, and then, when they're fully logged in the count will be updated. This is a protocol limitation and there's not much to do about it (although, most of the time you shouldn't notice, if the hub sends the op list fast enough...). This release also fixes a bug where the count was not correctly updated across all hubs.