Client->Client question
Moderator: Moderators
Client->Client question
Hello , i have 2 questions :
1)Does client->client lock2key algoritm is the same as in client->hub ?
(still xor byte = 5 ?)
2)Where can i find client->client protocol specification ?
Thats all
See ya
1)Does client->client lock2key algoritm is the same as in client->hub ?
(still xor byte = 5 ?)
2)Where can i find client->client protocol specification ?
Thats all
See ya
Sorry for my ENG , but i hope u'll understand me.GreetZ
Question 2...
DCprotocal here
http://www.lwave.ca/shasta/protocol.html
http://www.lwave.ca/shasta/protocol.html
http://odc.sf.net/ -> click on the first link, then go to the docs page. There are 3 protocol specifications, one of them covers Client-client protocol, too.
Yes.Does client->client lock2key algoritm is the same as in client->hub ? (still xor byte = 5 ?)
You're mistaken. Just after connecting to another client (for downloading) the one downloading uses the client->client protocol to inform the other of the file to download and the resume offset.I maybe mistaken but I belive there is no direct client to client protocal it all goes through the hub
Heh sth is not working
Strange ,I did as it was written in few protocal documentations
How I do this now:
M - My client (connecting)
O - Other client (listening)
for connect i send:
1)M:$ConnectToMe ONick myIP myPort
2)make serverSocket on port myPort
3)listening on port myPort
4)O:$MyNick nick|
5)do nothing
6)O:$Lock BLABLABLA Pk=WWWWWW|
7)Decode lock with exactly the same function as Hub_Lock decode
8)M:$Key decodedKey Pk=somePk|
9)... im waiting for "$Key .........." but dont recive it
to Send i use the same function as sending to hub...
communication with hub is OK but only with C->C i have this problem.
GreetZ
Strange ,I did as it was written in few protocal documentations
How I do this now:
M - My client (connecting)
O - Other client (listening)
for connect i send:
1)M:$ConnectToMe ONick myIP myPort
2)make serverSocket on port myPort
3)listening on port myPort
4)O:$MyNick nick|
5)do nothing
6)O:$Lock BLABLABLA Pk=WWWWWW|
7)Decode lock with exactly the same function as Hub_Lock decode
8)M:$Key decodedKey Pk=somePk|
9)... im waiting for "$Key .........." but dont recive it
to Send i use the same function as sending to hub...
communication with hub is OK but only with C->C i have this problem.
GreetZ
Sorry for my ENG , but i hope u'll understand me.GreetZ
look at these for examples of communication:
http://wza.digitalbrains.com/users/walt ... /sniffing/
key for EXTENDEDPROTOCOLABCABCABCABCABCABC is:
14d1 c011 b0a0 1010 4120 d1b1 b1c0 c030 d030 1020 3010 2030 1020 3010 2030 1020 3010
in two byte hex (no funny endianness like od(1) produces)
http://wza.digitalbrains.com/users/walt ... /sniffing/
key for EXTENDEDPROTOCOLABCABCABCABCABCABC is:
14d1 c011 b0a0 1010 4120 d1b1 b1c0 c030 d030 1020 3010 2030 1020 3010 2030 1020 3010
in two byte hex (no funny endianness like od(1) produces)
http://dc.selwerd.nl/hublist.xml.bz2
http://www.b.ali.btinternet.co.uk/DCPlusPlus/index.html (TheParanoidOne's DC++ Guide)
http://www.dslreports.com/faq/dc (BSOD2600's Direct Connect FAQ)
http://www.b.ali.btinternet.co.uk/DCPlusPlus/index.html (TheParanoidOne's DC++ Guide)
http://www.dslreports.com/faq/dc (BSOD2600's Direct Connect FAQ)