Couple of questions about DC++k and netminder

Rck60s1 · Post by **Rck60s1** » 2003-12-24 17:53

Apparently I continue to post questions in the wrong folder so i will try here...
1. My D/L speeds are seriously slow...rarely ever over 20 kbps...What can be done to increase them if anything?
2. Does anyone have a suggested speed for D/L and Upload when configuring netminder as I cannot find it anywhere in the readme
3. I am trying to connect in active mode but I need to know the settings for my modem...Apparently when I go into the NAT config I need certain info that I do not have...
4. Is there an exe file to run for DC++k as I cannot find it...does anyone have the link to the d/l

BSOD2600 · Post by **BSOD2600** » 2003-12-24 19:39

1. Find faster sources. What connection do you have?
2. Depends on your speeds. A good setting for upload limit is 90% of your available upload speed
3. What brand/model? Read: http://www.dslreports.com/faq/6518 yet?
4. DC++k can be found here but it has been discontinued. iDC++ has DC++k features and is being updated

Rck60s1 · Post by **Rck60s1** » 2003-12-24 20:53

I have a DSL connection thru Bellsouth...It is thru a Westell modem..Yes I read that FAQ,,Tried it and still could not access in Active mode...

joakim_tosteberg · Post by **joakim_tosteberg** » 2003-12-25 04:42

There are a client called dc++k CDM which is availble at http://www.ukdnb.dsl.pipex.com/dcpluspluskcdm/ more info about it here: http://www.imperialnet.org/forum/viewto ... sc&start=0 all six pages.