DC++

TheNOP

yes, the path for the Hosts file in W2K is:
C:\WINNT\system32\drivers\etc
same path for the lmhosts.sam file.

TheNOP

if the file is open(not in read mode only)and DC crash chance that the file will also get corrupted are high.

TheNOP

also, adding an entry to the "hosts" file, in the puter you want to use to access your server, might do the trick. like: 192,168.0.3 youraddy.no-ip.com Feels like that is to much work for just a weekend, but I've found a simplier way (perhaps not the best one). I just make a program that adds an en...

TheNOP

i see what you meen.
beside my modify batch file would brings other problems too.(HD space)

what about.
DC++ save the XML files, and if DC++ initialise correctly at startup, it back them up.
if initialisation fail, DC++ fall back to use the backup files.

TheNOP

The most obvious problem is: how do you know when a bad queue.xml is backed up over a good one?

hehe
that's a good one here.

i will see what i can do to add the date to those files name.

TheNOP

TheNOP wrote:W2K have the same path C:\WINDOWS\system32\drivers\etc

sorry change WINDOWS for WINNT

TheNOP

W2K have the same path C:\WINDOWS\system32\drivers\etc

TheNOP

to summerize... a few things to keep in minds when working with non routable IPs. since they are not routable ISP need a NAT or gateway device, problem is that you can't configure the ISP devices yourself. when you connect to the ISP network, depending on the DNS server configuration, DNS outside th...

TheNOP

Do you think a 200-300 mhz p2 can handle both that and a hub? a pentium 90 should be enough for the software router, with 2 or 3 nic. the third is for DMZ(only if soft support more then 2 nic and DMZ is needed). for the hub that depend on how many users are in the hub, best if not on same puter as ...

TheNOP

there is a posible solution... but only if you can get a routable IP.
it could be use to set a software gateway(router) for your whole group.
you could gain benefice of infinit port forwarding(almost), proxy, DHCP, DNS, etc..., for all users behind the gateway.

TheNOP

if i understand you correctly. in this kind of setup is that you're all in the same LAN as all the other users of that ISP.(same IP class) you won't be able to make a DNS server work to resolve outside DNS, unless the DNS server have a routable IP. since i don't know what hardware the ISP is using, ...

TheNOP

usualy local network = small LAN.

can you be more specific about the future LAN network layout ?
10 Mb network ?

TheNOP

if you have a router on your LAN, it might also have DNS resolution in it DHCP server.(not for inside DNS resolution, but outside). if DHCP allocate an IP to a puter, chance that the router will be also be able to resolve your no-ip addy are high. if you have no router, you might try to setup a soft...

TheNOP

i tough you had win9x.
but yes, i forgot the the quotes where needed in w2k batch files.
thanks to point it out.

TheNOP

search for $UserCommand support script by HaArD. info
or DC++k mod client.

TheNOP

i rarely saw windows repairing itself when reinstalling it over itself. it's not a repairs tool. :wink: corrupted program files will be replace, but not their configs files(in most cases). installing windows over windows is a waste of time, my 2 cents. if you can't solve the problem by deleting, edi...

TheNOP

note that in win98, the DOS box does not close by default. you will need to create a .pif for the batch file. to do so easely, while the DOS box is open, clic on the properties button. notch "close on exit". if not done you could end up with a lots of DOS box open, if using with the scheduler. :wink:

TheNOP

while waiting for this feature...

create a batch file that will copy Queue.xml to an other folder.
set windows scheduler to start the batch file as often as you want.

ex:
copyqueue.bat

Code: Select all

if not exist c:\temp mkdir c:\temp
copy C:\Program Files\DC++\*.xml c:\temp
exit

TheNOP

wouldnt that change the whole window text color ?

TheNOP

there is such feature in DC++.

it might not find the files as fast as you want(because of search spam),
or your queued files entries are set to 0, set resume to 1 for auto download.

TheNOP

one suppose to be impliment soon here
i don't know if it's done yet.

TheNOP

for more info look here

TheNOP

search for "$UserCommand" in hubs support.

TheNOP

The principle however is the same: going first is not always best, because those that follow can get the benefit of everything you did plus their own ideas, which you didn't get to see. DC++ improved upon DC, otherwise people would have used DC. And that's the truth. and what prevent you as the ori...

TheNOP

sorry...
to converter to convert NMDC script to SDCH script.
needed because some typo have been fix.
ex: DataArival changed to DataArrival, and a few other things.

TheNOP

Okay thanks. But my scripts dosn't work... I don't know why, but I gues that I should just go back to the old NMDC again, it's working there... But thanks for helping anyway... there are small change needed to be made for SDCH vbscript. download version .011 in it you will see a converter to conver...

TheNOP

look back at the link i gave you .021 is the latess, clic on download.
get the dependancy and scroll down for the hub download link.

TheNOP

i already got the answer to my question from another forum

you probably didnt ask the same way you asked in here.

TheNOP

SDCH version .03 should be out for, around, the end of the month...

TheNOP

And u spoke something about some hack, i cant see how one would be able to hack just by adding unicode support for the fonts IsnÃ‚Â´t a hack just a "not so nice" change in the code? i always tough that a "hack" was to make something do, what it was not dessigne to do at first. "not so nice" depend ...

TheNOP

on college network, probablility that people from outside will not be able to connect to your server are very high. chance are that you have a non routable IP. internet users can't have direct access to a non routable IP. that is why forwarding a port is needed, since you can't change the setting of...

TheNOP

TheNOP

the fact that uploading slows downloads to a crawl may be one of the most beneficial (although unintentional) aspects of the network. think about it- most download connections are capped at 2-4 times the upload connection. If these speeds were realized, it would be impossible to download at all bec...

TheNOP

1) ASCII Art must be done with a fixed width font 2)I know itÃ‚Â´s up to the end user to choose the right font so he getÃ‚Â´s the proper display, but when i test the ascii to see if it displays right i donÃ‚Â´t get the extra symbols to show right, these symbols get repalced with other symbols that ...

TheNOP

create your ascii art for Arial 8, it should look ok in default DC++ fonts setting.
most ascii art you will finds on internet will be Arial 10.

TheNOP

RiPOFF wrote:30 views but no reply?

probably just user like me who have the habit to check all of the new post.
since i/they can't reply for the hub developers, you will have to wait for one to read your post.

TheNOP

depending on your OS fat, restart the OS, scandisk and defrag.
one of those 3 things should help a little.
i usualy see this problem on puter that as been running for a long time or had a lots of files deletions durings the session.
this behavior worsen with IE5 and up if i remember.

TheNOP

[quote]In DC++ Advanced Settings > User Menu Items > Name: DropUser (or whatever) Command: <%[mynick]> !drop %[nick] %[line:desc] Hub IP / DNS (empty = all hubs, "op" = only when op) : <enter hub IP/DNS here>] PM To (empty to send in main chat): <the nick of admin bot goes here> [/quote what is the ...

TheNOP

very interesting project HaArD

thanks.

TheNOP

2/cant send a PM to bot, general bot is named as 0-Cancerbero in my hub, but if i write <0-Cancerbero> in the "PM To" field no messages is sending do ipban is support by hub or general bot. do general bot accept command tru PM or only from main. does general bot support the command you try to send ...

TheNOP

Phainein Terra look for or script it :) like trigger, when triggerbot receive !PMrulethendrop it PM the rules then send !drop <--the bot will do that so your custom command could look like: <%[mynick]> !PMrulethendrop %[nick] %[line:desc] where description could be use as a control to make the bot s...

TheNOP

bad refferer

http://ptokax.sourceforge.net/ is working, copy link, close IE, open IE and try again(paste the link).

jack-son.no-ip.com = public IP (external IP)

TheNOP

7 post up ^^^

in the dc hub am i meant to use a local ip i.e. 127.0.0.1 or 192.168 one or my main router ip 81.xxx.xxx.xxx

dchub setting or DC++ ?

by the way xxx.xxx.xxx.xxx:yyyy <--- yyyy is the port the hub listen to.

TheNOP

I already have !ban %[nick] %[line:reason] and it works just fine... Is there a way to have the reason line preformatted with some data for example (this doesn't work by the way, but you can see what I want).. !ban %[nick] %[line:reason] "You are slot blocking" This way the test shows IN the reason...

TheNOP

direct connect hub ver2 is for developer, i do not recommand you to use it, unless it's for testing or development purpose. [spoonfeedon] in direct connect hub configuration. name = your choice description = describe the hub purpose address = jack-son.no-ip.com port = port the hub will listen to in ...

TheNOP

contact the hub owner/OP they will register a new account/change your password for you, or, send you your actual password (if they can retrive it)

TheNOP

Phainein Terra what i am trying to tell you is, all custom commands behave like when they are use in main chat or PM. ex: <%[mynick]> !drop %[nick] %[line:desc] is the same and behave the same as in main chat !drop nick description. it just that !drop might not need, use or send the description. if ...

TheNOP

look, the hub is important (not all hub impliment the same commands prefix and commands set), scripts also, those custom commands are sent to the hub or a script. the hub might use !ban, !banIP, +ban or #ban as in hub command, same for scripts. if the command you send is not implimented or is disabl...

TheNOP

Gasman1015 wrote:Can you give me a link to the source code. Please....

same as usual here

TheNOP

i got a hard time to understand your first post.
can you be clearer please.
you're an OP...ok
did you ask the hub owner's what are the commands available to you ?
what is the hub soft name ? your's ?
what script/s is the hub running ?
can you post the one that is going nuts ?
what client do you use ?

DC++

Search found 256 matches

Re: Related question