DC++

ivulfusbar

Alternatively, the connection token could be used to determine which client is supposed to speak first after the handshake - whoever issued the token requested the connection and should thus be allowed to send the CGET first. In this case, the token cannot be optional in RCM and CTM, of course. Thi...

ivulfusbar

Since MSG never requires a valid response from the receiving client. I would consider it as part of BASE that you don't have to implement if you don't want to. All you have todo is to silently drop the message and not send back a STA.

ivulfusbar

Allow MSG in C-C context.

Problem solved.

Close thread! ;))

ivulfusbar

If you don't have a U4 and a I4 (or v6-alike versions) you have to ofcourse route the message through the hub. Remember that INF are increasing, so there might have been a I4 in a previous INF for that sid. You should also notice that adchpp and dc++ is implementations, and do not fully support all ...

ivulfusbar

The rationale for including both PID and CID is that another client should not be able to steal another client CID. PID is only used in client-->hub communication. The PID is never broadcasted by the hub to other clients. Ofcourse, someone with access to the hub can steal a clients CID by examining ...

ivulfusbar

1) What message do you want everyone to see?
the +test message, or the reply that the hub/script generate in response to +test being written, or both?

Unless you clearify this, we can't help you.

ALWAYS, create a minimal example of what you want be done.

ivulfusbar

I haven't claimed that it can't be addressed again, i only point you towards the obvious thread from which your discussion can start since it will explain the thoughts on a a subject which intersects with your question/statement. A simple search for "collect information" for example would have point...

ivulfusbar

read the thread http://www.dcpp.net/forum/viewtopic.php ... ght=rating

I suggest you search before trying to start something discussed years ago.

ivulfusbar

No binary official release of ADCHpp has not been released yet. But nothing stops someone from distributing a binary version. So if you have a problem compiling it, ask your favorite friend to compile it for you.

ivulfusbar

If so, a bug.

ivulfusbar

What happend is on a need to know basis.

ivulfusbar

I don't see a reason to impliment it. A simple diff/merge will function faster
and not requier any code-extensions.

ivulfusbar

I know who! I KNOW! ;))

ivulfusbar

It was removed since it was planned to not be used.

To now use it would be against the very idea why it was removed.

ivulfusbar

1) Ofcourse....

ivulfusbar

But there are guesses and educated guesses. ;))

ivulfusbar

GhOstFaCE wrote:........

Your post has nothing with the topic/thread todo.

ivulfusbar

Ofcourse. Read the GPL-faq et.c. and you will see

ivulfusbar

I know the API does, last time i discussed it with Sedulus. ;))

ivulfusbar

Make sure you have compiled md4.*

ivulfusbar

No, basicly, the uploading client waits for a timeout on the socket. I.e., lets the downloading client send something new, like initiating a a new $Get within a minute or whatever time-period you find satisfactory.

If nothing happens, then you disconnect.

ivulfusbar

You can try to run:

http://shakespeer.sourceforge.net/

Its also an opensource-client for the same protocol as DC++ supports.

ivulfusbar

One also have to distinguish between protocol and how messages are transmitted.

But no, nothing in NMDC is designed to work in a secure and reliable enviroment.

ivulfusbar

If so, i recomend clients with LUA-support. If you are somewhat knolwedgeable in copy-pasting code around you can easily run a simple script that blocks PM on certain events.

ivulfusbar

This is more of a hub.rule issue than a client-issue.

ivulfusbar

The clone BCDC has LUA-plugin support. And most other clones of clones supporting LUA derive their base from this clone. To write a good plugin-interface you need to determine what to expose to the plugins and what they can change. There are many design and thread-issues concerning this in the curre...

ivulfusbar

If my memory doesn't fail me, ADLSearch has been somewhat unsupported for some time. Some rebuilding of it has been done. But i need a patch has to be sent for any work on it to be done. ;))

ivulfusbar

ADC will fix the protocol-limitation, but this doesn't mean that DC++ will impliment the feature. It has not yet atleast.

ivulfusbar

Why would it be in DC++ best interest to fullfill some issue for passive OPs?

I don't get why it would be in the clients interest.

ivulfusbar

some legal reasons perhaps. You have to very carefull how you formulate such message. This should not be taken lightly.

ivulfusbar

Most OPs doesn't know enough to understand the difference between a passive and an active search-reply. Most OPs have for many years kicked/banned users depending on active search-replies which are extremly easy to spoof nickname/content in. Ofcourse IP is unique upto NAT. Passive search replies are...

ivulfusbar

If two persons are truely passive, then their is no use to reply with $SR since they can't connect to eachother. It is a waste of bandwidth. We will have millions of "i can see this file when i search but i can't download it threads" in this forum otherwise.

ivulfusbar

The development of DC++ is not targeted to be used in LANs. Using DC++ on large shares for a short moment of time will be expensive in initial TTH-creation cost. First of all, what settings do you have enabled when you find DC++ to be a hog? Have you enabled "Safe and compressed transfers"? What rea...

ivulfusbar

To create a compatible client:

1) Turn off TTH-tree downloads.
2) Turn off TTH-validations.

All and all this should be less than 10 lines of code to change in the codebase.
Also make sure you have turned off CRC32 checksums and ADLER32 checksums.

ivulfusbar

But, then, why don't you use the bz2-extension filelist instead of the xml.bz2 one. The bz2-extension without xml is extremly simple to parse. I would imagine all clients you try to connect to will support it.

ivulfusbar

hashing has nothing todo what you want to achieve. You can always decode this kind of info, but then you need general search-replies that can contain any metainfo or filelist containing any metainfo. The cost of this is essential. Lets consider a mp3-file, for example a untschackahackaunts.mp3 (a so...

ivulfusbar

and btw, depending on version id3-tags can be extremly complicated. You can even have pictures of the album-covers as parts of the tag. ;))

ivulfusbar

The point is the following. In the past, static const char* badChars = "$|.[]()-_+"; was removed from searches due to the fact that dc++ wanted to find as many files as possible with the same content when doing auto-searches (except $| which are used as protocol-delimiters). In that time TTH did not...

ivulfusbar

DC++ has builtin SSL support. And have had for some time. The SSL will be used in the ADC framework and the support is added as time goes by.

ivulfusbar

We are looking forward to a patch

ivulfusbar

Oohh.. private hub has been down since 14:30 CET yeasterday. ISP is investigating. Technicians has been called.

I called, its still not up. Some power-break might have shut something down somewhere. (i don't see what the complication would be, but hey..) (cet 1700)

ivulfusbar

Btw, your $Lock doesn't seem to be including Pk.

And on which level is the communication between the clients being done?

ivulfusbar

Learn howto instead:

Unpack an xml.bz2 file, browse the content and you will see what you need todo.

ivulfusbar

It will also make it possible to even more exploit dc++ as an DDoS application.

ivulfusbar

You can simply write a script that manages this. I have done it myself.. Its a 10 minutes job at the most. I based mine on TTHs. It do take some memory when you run it on hubs with several 1000 users. If i remember correctly, approximatly 30% of content in hubs are unique upto TTH. But then again, t...

ivulfusbar

I would not expect DC++ to handle 1TiB filelists. Most computers doesn't have 1TiB of memory to store the information on. If you on the other hand mean someone sharing 1TiB, then that information is rather useless. What is interesting is the number of items shared, directories and or files. Sharing ...

ivulfusbar

If you are gona campagin, do it better.

3 one-time-posters on a political issue.. This one can go to hall of fame. ;))

ivulfusbar

These threads are useless. So many people claim they can host must realise that right now there is no demand from arnetheduck for it.

ivulfusbar

You can always hide the application by using the filextension .pyw instead of .py in windows. You can also run it as a service. Most of the os-dependent code consists of os.fork and alike calls which easily can be if os.name-ish cased.

ivulfusbar

Yes, but you can't ask for help about a clone in the DC++ Support section. You should have used the "Other Direct Connect tools" section of the forum. When theparanoidone asked you which version of DC++ you use, you should have said that you used fuldc a clone of DC++ and so on... This wastes our ti...

DC++

Search found 476 matches

Re: general problems

Re: not in this way...