DC++

Lightning Man

Without specificity: You should only forward the port needed for hub operation (411; 412; 1411; 1412) to the computer hosting the Hub. In my configuration, I forward one Hub listening port (413) to one computer and another hub listening port (414) to the other computer. I then set up DC++ on each co...

Lightning Man

Your modem may also be a router, in which case it will need to be configured for running a hub.

Lightning Man

This would be perfect if you can do it, guys. One of my Ops for [particular game hub with very limited files allowed] also downloads [files I won't say to protect the guilty] and he's constantly adding and removing folders "permanently" every time he switches. He doesn't expect to be in both simulta...

Lightning Man

If so, there's more to it than that, as the files I download are usually under that size and complete without incident.

Lightning Man

What port is your NMH listening on? Can anyone load any filelists?

Lightning Man

1) What red tabs? (Meaning, no, apparently the red tabs are not enough since I am not even aware of their existence.)
2) If I am in a PM chat and, say, reading a webpage. I can get a sound to alert me to a PM or a response in PM, why not on a disconnect?

Lightning Man

I was in a PM today with one of my visitors when I thought that he had been quiet too long. I went to main chat and found that I had been disconnected from my hub (it happens.) Could some sort of annoying noise go off if you are disconnected from a Hub before you close the program?

Lightning Man

Which hub software are you using?

Lightning Man

Are you sure you have the right Trivbot for the right hub software? (You'd need a VB script for NMDCH and a lua script [IIRC] for Ptokax.)

Lightning Man

What happens when you try to run Trivbot?

Lightning Man

This is happy news.

Lightning Man

Try 412.

Lightning Man

It may not be on your end. It could be that the DSL users in question are having their ports blocked, either by their ISP or by their own firewalls / routers.

Lightning Man

Are you using NMDCH 1 or 2. Unbanning is actually very easy in NMDCH 1 (although I didn't figure it out for a while.) Click on the IP you want to unban, then press your delete key. That's it. Simple.

Lightning Man

The hub software should register your hub with the public list. After a time, your hub will be listed.

Lightning Man

Indeed it does work. Now I no longer have to rely on my ops to check people's files. Thanks.

Lightning Man

Blame the use of "GUI" not on my lack of understanding that DCH++ is a service but 1) Night's mention of screenshots and 2) my current sleep deficit. The principle however is the same: going first is not always best, because those that follow can get the benefit of everything you did plus their own ...

Lightning Man

In my opinion, the advantage goes to Arne. He gets to look at the other program's GUI and incorporate any good ideas into his own. It's how Word beat Word Perfect and DC++ got to be better than DC.

Lightning Man

IIRC, the new NMDCH is plug-in only.

Lightning Man

How can software that hasn't been released be "old?"

Lightning Man

That looks like a VB script to me.

Lightning Man

Thank you, it will be worth it for me to move to Windows 2000 or Linux to use. Thanks.

Lightning Man

Is there anything you can say about the operation of the beta version so far?

Lightning Man

It's still a hub software problem, IMO. DC++ has no control over how the hub software reacts to the entreaty to reconnect automatically. It is how the hub in question is reading the command. Whatever hub this is happening with, it emphatically doesn't happen with all hubs. So the coder of whatever h...

Lightning Man

Their slots are being used by others, either in your hub or in another hub to which they are connected at the same time.

Lightning Man

It's national news in the US, too. However, whether anyone likes it or not, the RIAA and friends are perfectly within their rights. It's the wrong way to accomplish what they want (which is to make money,) but it is within their rights. And the mother in the story is wrong. What they did technically...

Lightning Man

Has anyone made one?

Lightning Man

Improved drift correction, changed interval mechanics so that you can do it in any interval that divides 60 evenly (1 minute, 2 minutes, 3 minutes, 4 minutes, 5 minutes, 6 minutes, 10 minutes, 12 minutes, 15 minutes, 20 minutes, 30 minutes, an hour.) ' Quarter Hour Chime v 1.4 ' by Lightning Man ' f...

Lightning Man

You wrote: Dim sBotName Dim iTrigger Dim aTriggers(10,3) sub Main() Dim sBotName = GetAfix frmHub.RegisterGetAfix(CStr(sBotName)) ... Your errors: Dim sBotName = GetAfix Should be: sBotName = "GetAfix" frmHub.RegisterGetAfix(CStr(sBotName)) S...

Lightning Man

Adds an adjustment to keep it on the quarter hour, preventing drift. ' Quarter Hour Chime v 1.3 ' by Lightning Man ' from InfoBot by HaArD ' with elements from Shadowtek Dim sBotName, iMinutes, iStarter, sTime Sub main() sBotName = "Chime" iMinutes = 15 ' This script is designed to...

Lightning Man

http://download.com.com/3000-2196-10178286.html?tag=lst-0-1

Lightning Man

You have to have version one of that program installed for your hub to work.

Lightning Man

Direct Connect. Get that one.

Lightning Man

http://www.neo-modus.com/?page=Download

Lightning Man

I told you the name.

Go here:

http://www.neo-modus.com/?page=Download

Lightning Man

nmdc is the Neo Modus Direct Connect client. It is a different program than DC++ and is required to run the nmdch (Neo Modus Direct Connect Hub.)

Lightning Man

If you introduce a script after the hub is running, you have to hit reset before it will work.

Lightning Man

To stop the double bans, change this: If instr(1, Lcase(sDesc), "mldc client") Then sIP = curUser.IP curUser.Kick If bPermBan Then frmHub.lstPermban.Additem sIp End If if cstr(curUser.iBytesShared) = "11534336" then sIP = curUser.IP curUser.Kick If bPermBa...

Lightning Man

As to logging in, it is designed for people to have to log in so it knows to pay attention to what they're saying. That can't be changed.

Lightning Man

How are you running the script? How do you start it?

Lightning Man

I am not the best scripter in the world, but it seems that it is set to run the chat in main:

Code: Select all

bMain = True ' Bot runs in main

As to the other thing, what do you mean not having to log in? Do you want to access the script without being in your hub?

Lightning Man

The code would be helpful.

Lightning Man

I tried to get my son to get off of his favorite programs (all riddled with spyware) but he wouldn't. Why? 'Cause his cousin told him my alternatives suck.

So he has a computer that doesn't work. But his programs don't suck.

Lightning Man

cyberal wrote:If folks are still using hubsoftwares that can be manipulated so easily, fuck 'em!

Sure, let's run roughshod over people who are allowing their personal computers for use in you trading files. What was your IP again?

(edit: GMT - fixed your quote tags)

Lightning Man

Have you thought about checking the network card?

Lightning Man

What is the phrase? Keep it Simple, Sweetheart? Anyway, I learned something: just plain 'And' works fine. Final 1.2 version, guaranteed to work (until I find out it doesn't.) ' Quarter Hour Chime v 1.2 ' by Lightning Man ' from InfoBot by HaArD ' with elements from Shadowtek Dim sBotName, iMinutes, ...

Lightning Man

This is NOT yet tested. Iam going to try it at home later, based on standard vb (which this sometimes doesn't duplicate.) ' Quarter Hour Chime v 1.2 NOT YET TESTED ' by Lightning Man ' from InfoBot by HaArD ' with elements from Shadowtek Dim sBotName, iMinutes, iStarter, sTime Sub main() sBo...

Lightning Man

That should have been a code tag instead of a quote tag and I can't change it myself. Sorry.

Lightning Man

Darn it. There is an initialization problem because I don't know the proper syntax to make the evaluation I want on one line. Until I learn it, I believe this will solve the problem. ' Quarter Hour Chime v 1.1 ' by Lightning Man ' from InfoBot by HaArD ' with elements from Shadowtek Dim sBotName, iM...

Lightning Man

Inspired by the code to broadcast a text message on a regular interval, I decided to come up with a quarter hour time chime to let my hub's users know what time it was (at least on my machine, which is important because my reboot messages always are in my time.) This is a VB script for NMDCH. ' Quar...

DC++

Search found 53 matches

Audible alert for disconnection

DCH++ beta tester reviews

VB script to dch2 PlugIn converter

Version 1.3

Quarter Hour Time Chime